MATERIAL SAFETY DATE SHEET
- info@colortekinks.com
- Shivaji Nagar, Waliv, Vasai(E) - 401 208
MATERIAL SAFETY DATE SHEET
Product Name: Liquid Printing Ink for Gravure Process in Various colours.
Product Description: Liquid Printing Ink for Gravure Process in Black, Red & Various Colours.
Chemical Characterization:
Weight% CAS
Emergency Overview
Physical Appearance: Specific colored Liquid with a characteristic odor.
Potential Health Effects
Eyes : May cause eyes burning or irritation.
Skins : May cause irritation in the form of redness, burning or dermatitis.
Ingestion: Solvents present in this mixture may be fatal if swallowed. Also small quantity may affect nervous system and cause abdominal discomfort. Contact local poison control centre or physician immediately. Do not induce vomiting unless instructed so by a physician. If vomiting occurs, keep head lower than hips to help prevent aspiration. Get medical attention immediately.
EYES: Immediately flush eyes with plenty of water for two to three minutes. Remove
Any contact lenses and continue flushing for 15 minutes, get medical attention.
Skin : Remove contaminated clothing and immediately wash affected area with plenty of soap and water. Seek medical attention if necessary. Wash contaminated clothing before reuse, with plenty of soap and water. Seek Medical attention if necessary.
Ingestion: Contact local poison control centre or physician immediately. Do not induce vomiting unless instructed so by a physician. If vomiting occurs, keep head lower than hips to help prevent aspiration. Get medical attention immediately.
Vapour can flow along surfaces to distant ignition sources and flash back.
Extinguishing Media : Carbon Dioxide, Dry Chemical Foam and Water Spray. Hazardous Combustion Products : Oxides of carbon and noxious fumes.
Explosion Hazards : Above flash point, vapor to air mixtures are flammable if within the flammable limits noted above. Contact with strong oxidizers may cause fire or explosion.
Fire Fighting : Wear full protective equipment and a self contained Equipments breathing apparatus with the full face covering operated in the pressure demand mode. Water spray may be used to keep fire-exposed containers cool until they can be evacuated.
Sensitive to Static Discharge : Yes.
Hazardous Decomposition Products: Hazardous polymerization will not occur.
Comments: Ventilate area of leak or spill. Remove all ignition sources. Wear appropriate personal protective equipment. Contain and recover liquid when possible. Use non-sparking tools and equipment. Contain liquid in an appropriate container or absorb with an inert material i.e. sawdust, dry sand, universal binder, acid binder or cloth etc., and place in a chemical waste container. DO NOT FLUSH TO SEWER. If leak or spill has ignited use water spray to disperse any vapor and flush spill away from personal or other ignitable materials. When picked up, treat material as prescribed under heading “DISPOSAL”.
General Procedures: Protect container against physical damage. Store in a cool, dry well ventilated location away from any area where a fire hazard mat be acute. Containers should be bonded and grounded for transfer to avoid static sparks. Do not permit smoking in storage areas. Use only non-sparking tools and equipments around the liquid. Empty containers may be hazardous from residual liquid and vapor. Observe all warnings and precautions listed.
Transport Information:
Domestic (Land, D.O.T.)
Proper Shipping Name: Printing Ink, flammable
Label: Flammable Liquid
Hazard Class: 3
UN/NA: UN 1210
Packaging Group : II
Information reported for product /size:
International (Water, I.M.O.)
Proper Shipping name: Printing Ink, flammable
Label: Flammable Liquid
Hazard Class: 3
UN/NA: UN 1210
Packaging Group: II
Information reported for product /size:
Chemical Stability : Stable
Conditions to avoid : Incompatible materials, Dust generation, Heat, Moisture.
Hazardous Decomposition Products: Carbon Monoxide, Carbon Dioxide.
Hazardous Polymerization : Will not occur.
Environmental Data: No data can be given as products are insoluble in water.
Acute Toxicity: Over exposure to above solvents may cause fatigue of eyes, confusion, dizziness and drowsiness. Prolonged exposure may cause Unconsciousness.
Examine possibilities for re-utilization. Package products wastes. Close and label the waste receptacles & likewise any unlearned empty containers. Dispose off them at a suitable waste incineration plant in accordance with the official regulations. Where large quantities are concerned, consult the supplier. When unlearned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues.
DOT (DEPARTMENT OF TRANSPORTATION)
Proper Shipping Name : Printing ink flammable
Technical Name : Printing Inks
Primary Hazard Class/Div. : 3
Placards : FLAMMABLE
Label : FLAMMABLE LIQUID
Highly flammable material, insoluble with water. Keep away form sources of ignition. Do not breathe vapor. Take precautionary measures against static discharge.
Use: This product is used as a printing ink in packaging & paper industry.
WE BELIVE ALL THE DATA AND INFORMATION GIVEN IS ACCURATE AS OF DATE OF PREPARATION AND IS OFFERED IN GOOD FAITH BUT WITHOUT WARRANTY OR REPRESENTATION. SINCE CONDITIONS AF USE ARE BEYOND OUR CONTROL, WE DISCLAM ALL LIABILITY FOR RELIANCE THEREON. THIS IS OFFERED SOLELY FOR CONSIDERATION, INVESTIGATION AND VERIFICATION.